NorthCan Roofing recommends the addition of an effective and efficient drainage system to commercial roofing for better performance results.
NorthCan Roofing, the flat roofing expert with over 30 years of experience in repairs, maintenance, and installation of flat roofing of all types, has made a valuable recommendation. The flat roofing company says adding an efficient drainage system can take care of the usual problem of water accumulation and poor run-off.
“A common problem faced by many buildings is poor drainage which leads to pooling of water and potentially increases the chances of roof leaks,” says the spokesperson for NorthCan Roofing. “By installing a proper drainage system, you can avoid frequent repairs and the need to replace your roof before its time is due. It is a simple way of making your flat roofing more efficient and save money.”
Unlike sloped roofs, flat roofs do not have a downward slope and hence the accumulated water does not flow down naturally with gravity. That’s why investing in a good drainage system is a good move according to NorthCan Roofing.
The flat roofing experts have suggested a few drainage systems that commercial setups can use to improve the performance and longevity of their flat roofing.
The top recommendation from NorthCan Roofing is the scupper or the edge drain. It is a square or circular hole that is cut and fixed on the side of the flat roof. It has a downward spout or gutter to direct the water to the ground.
According to NorthCan Roofing, the scuppers must be installed in an area that can be reached easily for maintenance and cleaning tasks. Choosing the right size of the scupper is also important. It should be large enough to allow the drain debris to flow through without getting clogged. Installing the scupper at the place on the roof where water already naturally accumulates is the best way to optimize its utility.
NorthCan Roofing recommends the fitting of interior drains to boost the life of flat roofing systems. It works by diverting the water that collects on the outside of the flat roof to a central point. From there, it enters a piping system under the roof for drainage.
As the pipes are not installed on top of the roof, they are well protected from the elements and hence do not get damaged fast. This type of drainage system is more flexible as it need not be fixed at a specific point on the roofing. It also protects the building from damage as the excess water is directed inwards.
NorthCan Roofing recommends pairing the interior drain with scuppers for better results as the arrangement can increase the roof’s capacity to drain water. This can help avoid and prevent emergency roof repair or replacement situations.
For more information, visit https://northcanroofing.com/